Easy-to-follow, Step-by-step Tube Repair


Step 6: Use a metal bristle brush to remove any buffing dust.

Remove Buffing Dust    

Step 7: Apply a thin coat of Rema cold vulcanizing fluid to the entire buffed area. Do not over-apply. Allow to dry thoroughly. Test with back of your finger, outside of the repair area. When cement is tacky, but does not stick to your finger, the cement is ready.
Apply Rema Cold Vulcanizing Fluid   Cover Entire Area   Test with Back of Finger
         
         
         
         

Step 8: Peel foil backing from the patch. Center the patch over the injury. Press the patch down on the tube, using pressure at the center and working out to the edge.
Peel Foil Backing   Center over Injury   Press Patch Down
Next Step