 |
 |
|
Survivair Respirators, Parts & Cartridges |
 |
 |
 |
 |
Survivair Premier ®
Half-mask
Respirator
The lowest breathing
resistance of any dual-cartridge respirator
• Extra-large inhale valves
and exhale valve
• Soft, pliable silicone facepiece
• Wide sealing flange for
a secure seal
• Special nose bridge and
elastic straps for a good fit
• NIOSH approved
Click to order Survivair
Half-mask Respirator |
 |
Survivair Opti-Fit ™
Full-face
Respirator
Optimum fit and comfort at an economical price
• Minimal replacement parts
for reduced maintenance
• Comfortable and durable
silicone face seal
• Sturdy, distortion-free lens
with anti-scratch coating
• Nose cup prevents fogging
• Adjustable, five-strap harness
• NIOSH approved
Click to order Survivair Opti-Fit
Full-face Respirator |
 |
SurvivairMax ™
Full-face Respirator
Maximize your field of
vision and your comfort
• Soft, high-grade silicone
for superior comfort
• Double-sealing flange with
rolled edge for a secure fit
• Large polycarbonate lens has an
anti-fog and anti-scratch coating
• Fully adjustable five-strap
suspension
• NIOSH approved
Click to order SurvivairMax
Full-face Respirator |
 |
 |
 |
 |
 |
 |
 |
Inhalation valve
(two required) |
|
 |
Exhalation valve |
|
 |
5-strap head harness |
|
 |
|
Headstrap assembly |
|
Facepiece lens |
|
Head cradle
suspension assembly |
|
Replacement lens |
|
Prescription spectacle
adapter |
|
 |
 |
Survivair ® Opti-Fit™, MAX™ and
Premier® Cartridges
Cartridges fit T-Series respirators and have a Bayonet Mount |
 |
NIOSH
Approval # |
 |
Box
Qty. |
 |
Item No. |
 |
 |
 |
P100 (replaces HEPA under new NIOSH standard) |
 |
TC-84A |
 |
10 |
 |
|
 |
 |
Ammonia (anhydrous or from livestock buildings) |
TC-23C |
6 |
|
 |
Acid gas and organic vapors |
TC-23C |
6 |
|
 |
Organic vapors (pesticides – except fumigants, unless allowed on fumigant label, and paint spraying – except isocyanate-containing paints)
|
TC-23C |
6 |
|
 |
Uni-Sorb™ cartridge: organic vapors, acid gases (sulphur dioxide, chlorine or chlorine dioxide, hydrogen chloride), ammonia or formaldehyde
|
TC-23C |
6 |
|
 |
Uni-Sorb™ cartridge with permanently attached P100 pre-filter. Use for same hazards as Uni-Sorb™ cartridge above, plus chemicals that contain an oil mist. |
TC-23C/84A |
4 |
|
 |
Organic vapor cartridge with permanently attached P100 filter. Use for pesticides (except fumigants unless label allows) or paints (non-isocyanate containing) that have an oil mist. |
TC-23C/84A |
4 |
|
 |
Ammonia, methylamine, with permanently attached P100 pre-filter. Use for same hazards as ammonia cartridge above plus, chemicals that contain oil mist. |
TC-23C/84A |
4 |
|
 |
Organic vapor/acid gas cartridge with permanently attached P100 pre-filter. Use for same hazards as acid gas/organic vapors, plus for dusts/mists.
|
TC-23C/84A |
4 |
|
 |
N95 Pre-filters are recommended for dusty conditions (requires use of retainer below) |
TC-84A |
24 |
|
 |
Retainer for N95 Pre-filter (fits both half-mask
and full-face.) |
– |
10 |
|
 |
Base for N95 Pre-filter (only needed if using N95
Pre-filters without a cartridge.) |
– |
10 |
|
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|