Moldex Replacement Cartridges, Pre-filters and Parts

Moldex Respirator In-use
Features of Moldex 8000 Series
Respirators

• Soft, extra-wide seal conforms
  to your face without pressure points
• 30% lighter than conventional masks
• Easy to maintain, no gaskets to replace
• Better view with the low-profile design

   Moldex 8000 Series Respirators

   View our full index of Moldex 8000 Series
   Respirators, Cartridges and Parts:
Moldex 8000 Series Respirator Cartridges NIOSH
Approval #
Qty. Item No.
Gray Cartridge Pesticide vapor (except fumigants, unless allowed on label), paint vapors (except those containing isocyanates) and organic vapors
TC-23C-1223
10
2
Green Cartridge Ammonia (anhydrous or from livestock confinement)
TC-23C-1369
10
2
Yellow Cartridge Acid gases/organic vapors (disinfecting livestock bldgs., chlorine, sulphur dioxide)
TC-23C-1225
10
2
Olive Green Cartridge Smart® Cartridge – use one cartridge to replace multiple chemical cartridges. NOTE: A Smart® cartridge will last a shorter time when protecting against a single hazard like a pesticide. Protects against organic vapors (paint/pesticide); ammonia (anhydrous or from livestock confinement) and methylamine; acid gases (disinfecting livestock, chlorine, sulphur dioxide and hydrogen chloride).
TC-23C-1809
10
2
Pink Cartridge P100 Cartridge (Replaces HEPA under new NIOSH standard)
TC-84A-1443
10
2
Moldex 8000 Series Pre-filters and Replacement Parts
Pre-filters and Parts NIOSH
No.
Qty. Item No.
N95 Pre-filter
(Use for particles and non-oil base pesticides
and chemical sprays)
FTC-84A-1343
10
P100 Pre-filter
(Use as a pre-filter with oil and non-oil based pesticides)
TC-84A-0117
2
P100 Piggyback Adapter
(Required to attach P100 Pre-filter to cartridge)
2
P100 Stand-alone Adapter (Used to attach P100 pre-filter directly to facepiece when not using a cartridge)
2
Replacement N95 Pre-filter Retainers
Replacement Strap Assembly
Replacement Exhale Valve


2
1
1